Essential Slate Sealer Satin Finish

PROFESSIONAL PERFORMANCE NATURAL SLATE SEALER

Quick drying formula – forms a satin/gloss, durable stain-resistant coating

ESSENTIAL SLATE SEALER SATIN FINISH is a high-performance stone sealer formulated especially for natural slate surfaces. It is also suitable for other porous natural stone such as limestone and sandstone. It certainly provides a hard wearing, attractive satin finish, that can intensify natural colours and gives a stain-resistant coating. The product may be used on external or internal surfaces.

A protective sealer that creates a durable, crystal clear satin finish, Essential Slate Sealer Satin Finish is quick drying and easy to apply. Most importantly, its benefits are that it gives high-quality protection that prevents stains and general grime & dirt from penetrating into the surface, above all making it easier to clean and maintain.

HOW TO APPLY:

1. Remove any loose debris from the work surface before you start and ensure you have adequate personal protection, i.e gloves, suitable protective eye-wear, face mask & clothing.
2. Above all, the surface must be completely clean and dry before applying, and in addition, make sure weather conditions are favourable before commencing.
3. Apply Essential Slate Sealer Satin Finish thinly and evenly with either a low-pressure sprayer, micro-fibre mop, paintbrush or soft cloth, taking care not to leave application marks or allowing the product to puddle on the surface. Do not dilute!
4. Allow between 45 and 60 minutes of drying time before applying the second coat, repeating the same process; apply the product in the opposite direction to help to achieve an even consistent finish. If necessary more coats can be applied to achieve a “gloss” finish if required.

Please Note: Essential Slate Sealer Satin Finish may change the colour/appearance of some surfaces – always try the product in an inconspicuous area prior to use. Surfaces which are not to be sealed should be protected with masking material.

MAINTENANCE:

Clean sealed areas with a mild, ph neutral cleaner or a very low concentration of our outdoor cleaner range. Do not use harsh or abrasive cleaning agents as this can have a negative effect on the treated surface. NOT RECOMMENDED FOR USE ON HIGHLY POLISHED STONE & CERAMIC GLAZED SURFACES.

COVERAGE:

– Up to 15m²/per litre per coat.
– Coverage will vary depending on the type of surface application.

KEEP OUT OF THE REACH OF CHILDREN

PRECAUTIONS:

H302: Harmful if swallowed.
H319: Causes serious eye irritation.
P102: Keep out of reach of children.
P233: Keep container tightly closed.
P262: Do not get in eyes, on the skin, or on clothing.
P264: Wash skin thoroughly after handling.
P301+330+331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting.
P302+350: IF ON SKIN: Gently wash with plenty of soap and water.
P305+351+338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P333+313: If skin irritation or rash occurs: Get medical advice.

Give us Your Review and Get Rewarded 10% OFF!

We would love to hear your feedback, and we would be incredibly grateful if you could take a couple of minutes to write a honest Product Review for us. This will allow us to improve our products and let others recognise the value we provide.

We all like to get a little something extra. We know that our product will deliver brilliant results for you, and if you take the time to document the cleaning process, we will give you a nice discount!

Simply take a Photo Before and a Photo After applying our product and post them direct on our product page in REVIEWS & QUESTIONS section below and write a quick Product Review for us. We will give you a 10% Discount Off your next order, or you can give the code to friends and family.

If you are feeling adventurous/creative, you could make a video, we might even throw in something extra too (try it on your smartphone, it’s fairly easy to do!).