What Can We Help You With?

This term is used in relation to applying multiple coats of sealer. It means that the 2nd or 3rd coat of sealer needs to be applied before the previous coat has fully dried.

Unless over applied, or applied to the wrong type of stone, the sealers should not make the surface more slippery.

No, if left to long it might start to crystalise and dry white on the surface, but it will not damage the surface. If this does occur, it can be removed by either a stiff broom and water or a pressure washer.

Like many household cleaners, if applied concentrated to grass or plants, it will certainly harm if not kill them. This can always be avoided by saturating the adjacent areas with water prior to applying the cleaner and then rinsing off with copious amounts of water. This will then dilute the cleaner to the point where it will not harm grass or plants.

Not always as the cleaner is highly effective. But a pressure washer at relatively low pressure will need to be used to clear the joints between the pavers.

No, it will not change the appearance of the tiles.